Desalination Essay

1. Introduction

Ever since desalination was originally invented in antiquity, different technologies have been developed. Back in the 4th century BC, Aristotle, the Hellenic philosopher, described a desalination technique by which non-potable water evaporated and finally condensed into potable liquid. Likewise, Alexander of Aphrodisias in the 200 AD described a technique used by sailors, as follows: seawater was boiled to produce steam, and that steam was then absorbed by sponges, thereby resulting in potable water [1]. Since then, the technology of seawater desalination for the production of potable water evolved rapidly and has become quite popular [2].

The most reliable desalination processes that can currently be exploited at the commercial scale can be divided in two main categories:

(a)

thermal (or distillation) processes like multi-stage flash distillation (MSF), multi-effect distillation (MED), thermal vapor compression (TVC), and mechanical vapor compression (MVC) processes; and

(b)

membrane processes: reverse osmosis (RO) and electrodialysis (ED) processes. ED is mostly used for brackish water installations, while RO can be used for both, brackish and seawater [3].

Over the last few years, a large number of desalination plants began to operate globally. Moreover, the production cost of desalinated water has been considerably decreased and is expected to decrease even further [4,5]. This is mostly due to the recent improvements in membrane technology, but also due to the increase of the energy conversion coefficiency for desalination processes [6].

In this paper, a short review of water desalination is provided before cost data are examined and processed. This paper focuses on water desalination processes and projects in Greece.

2. Desalination is Growing around the World

Desalination is growing so fast globally that it is more than certain that it will play a significant role in water supply in the years to come. Desalination is growing particularly in parts of the world where water availability is low. Annual desalination capacity seems to increase rapidly as years go by.

A sharp increase in the number of desalination projects to supply water is indicated. This rose from 326 m3/d in 1945 to over 5,000,000 m3/d in 1980 and to more than 35,000,000 m3/d in 2004 [7]. In 2008, the total daily capacity was 52,333,950 m3/d, from some 14,000 plants in operation globally [8]. In 2011, the total capacity was about 67,000,000 m3/d, while in 2012 it was estimated at about 79,000,000 m3/d from some 16,000 plants worldwide [9].

The Gulf Region (Middle East) has the biggest number of desalination plants in the world, followed by the Mediterranean, the Americas, and Asia [10]. The percentages of desalination plants for each geographical area are shown in Figure 1.

The global capacity of desalination plants, including renewable desalination, is expected to grow at an annual rate of more than 9% between 2010 and 2016. The market is set to grow in both developed and emerging countries such as the United States, China, Saudi Arabia (SA) and the United Arab Emirates (UAE), as shown in Figure 2. A very significant potential also exists in rural and remote areas, as well as in islands (Figure 2, rest of world (ROW)), where grid electricity or fossil fuels to generate energy may not be available at affordable costs. About 54% of the global growth is expected to occur in the Middle East and North Africa (MENA) region [11], where the 21 million m3/d of desalinated water in 2007 is expected to reach 110 million m3/d by 2030, of which 70% is in SA, the UAE, Kuwait, Algeria and Libya [11].

Figure 1. World desalination plants per geographical area (%). Adapted from [10].

Figure 1. World desalination plants per geographical area (%). Adapted from [10].

Figure 2. Global installed desalination capacity, 2010–2016. Adapted from [11].

Figure 2. Global installed desalination capacity, 2010–2016. Adapted from [11].

The majority of the largest desalination plants (in operation or under construction) use seawater and are located in the Middle East. The biggest desalination plant is the Ras Al-Khair in the city of Ras Al-Khair (also called Ras Al-Zour or Ras Azzour) SA, which uses both membrane and thermal technology with a capacity over 1,000,000 m3/d, in operation since 2013. The Ras Al-Khair plant supplies Maaden factories with 25,000 m3 of desalinated water and 1350 MW of electricity. It also supplies with water the capital city of Riyadh and several central cities with a total need of 900,000 m3/d [12,13]. Another example is the 880,000 m3/d MSF Shuaiba 3 desalination plant that is located along the east coast of SA and supplies with potable water the cities of Jeddah, Makkah, and Taif. SA also hosts the Ras Al-Zour unit, producing 800,000 m3/d of water [14]. Table 1 shows some of the biggest desalination plants in the world.

Table 1. The biggest desalination plants around the world. SA: Saudi Arabia; and UAE: United Arab Emirates. Adapted from [12,13,15].

LocationCapacity (m3/d)FeedwaterOperation year
Ras Al-Khair, SA 1,025,000N/A2013
Shuaiba, SA880,000Seawater2007
Ras Al-Khair, SA800,000Seawater2007
Al Jubail, SA 730,000 Seawater2007
Jebel Ali, United Arabic Emirates600,000Seawater2011
Al-Zour North, Kuwait567,000Seawater2007

As far as the membrane technologies are concerned, especially the RO desalination technology (one of the most renowned), there are big plants around the world with great potential in energy saving and reasonable production cost (Table 2) [16]. The largest membrane desalination plant in the world is the Victoria Desalination Plant in Melbourne, Australia with a capacity 444,000 m3/d, in operation since 2012. However, larger units will soon operate, like the Magtaa plant in Algeria and the Soreq plant in Israel, with capacities of 500,000 m3/d and 510,000 m3/d, respectively [13].

Table 2. Major reverse osmosis (RO) desalination plants in the world. Adapted from [13,16].

LocationCity, CountryCapacity (m3/d)
Soreq desalination plantRishon Letzion, Israel510,000
Magtaa desalination plant Oran, Algeria500,000
Victoria desalination plantMelbourne, Australia444,000
Point Lisas desalination plantPoint Lisas, Trinidad109,019
Tampa Bay desalination plantTampa, FL, USA94,635

3. Production Cost of Desalinated Water

The overall cost of desalination can be divided into investment cost and maintenance-operation cost. Investment cost involves land, edifices and equipment, as well as transportation cost, insurance, construction, legal fees and unforeseen costs. Maintenance and operation cost is divided in energy cost, maintenance, repairs, personnel/staff, spare parts, and reconstruction when required. Energy cost is the higher contributor to operation cost and thus to the overall cost. In many cases, energy cost can reach almost the 60% of the operation and maintenance cost. A comparison of the total cost of the RO and MSF technologies is given in Table 3 [17].

Table 3. Cost percentage in conventional RO and multi-stage flash distillation (MSF) of the same capacity in Lybia. Adapted from [17].

Desalination technologyInvestment cost (%)Energy cost (%)Maintenance & repair cost (%)Membrane replacement cost (%)Personnel cost (%)Chemicals cost (%)
RO (membrane)3126141397
MSF (thermal)42418072

Cost evaluation for desalination is a difficult process as data are influenced by different factors such as energy cost, materials and labor. Those factors differ significantly from place to place. Moreover, cost is influenced by elements like desalination technology, total dissolved solids (TDS) concentration of the raw water used to feed the plant, and other economic parameters that related to local conditions [18]. In conclusion, desalination cost is significantly decreasing when brackish water is used instead of seawater and when the capacity of the plant is increased (Table 4).

Table 4. Desalinated water production cost from seawater and brackish water.

Capacity (m3/d)Cost (€/m3)
Sea waterBrackish water
3,8000.970.50
7,6000.700.27
19,0000.540.21
38,0000.500.17
57,0000.490.15

Membrane desalination technologies such as RO are known for their lower energy demands compared to thermal technologies which can be further reduced using energy recovery systems. Such limited energy demands have direct effect on the cost of the produced desalinated water, which in most cases is lower than the cost of water produced by thermal technologies. The RO cost per feeding water and capacity is shown in Table 5, compared to the cost related to the most common thermal desalination technologies.

Table 5. RO desalination production cost compared to thermal desalination technologies cost, per feeding water and production capacity. MED: multi-effect distillation; and VC: vapor compression. Adapted from [19].

FeedwaterPlant capacity (m3/d)Cost (€/m3)
Brackish water RO<204.50–10.32
20–1,2000.62–1.06
40,000–46,0000.21–0.43
Seawater RO<1001.20–15.00
250–1,0001.00–3.14
1,000–4,8000.56–1.38
15,000–60,0000.38–1.30
100,000–320,0000.36–0.53
MSF<1002.00–8.00
12,000–55,0000.76–1.20
>91,0000.42–0.81
MED23,000–528,0000.42–1.40
VC1,000–1,2001.61–2.13

Hybrid desalination systems, which are used to combine desalination technologies, are suitable for big installations in order to accomplish scale economies that reduce the production cost. In such plants, membrane technologies can be combined with thermal technologies and vice versa. To give an example, in a plant where the brine flow of RO is the feed flow of membrane distillation, the cost is 0.94 €/m3. Had the system used only RO, the respective cost would be 0.94 €/m3, whereas the same system operating under membrane distillation would have a production cost of 0.99 €/m3. In other words, when technologies are combined the double quantity of water is produced at the same cost or less compared with the alternatives. To give another example, a MSF used in a desalination plant of 528,000 m3/d, produces water at a 0.32 €/m3, whereas when it is combined with RO, its cost is reduced by 15% [18

Separating Seawater Through Desalination Essay

Chemistry assignment:

The mixture selected in this assignment is seawater obtained from the hydrosphere.

The seawater can be separated through out several processes, both chemically and physically. The separation process is known as desalination. This name is getting more common everyday, as the Australian water demand grows with population we can no longer ignore the salinity problem. Desalination process could take use of the salt concentrated water, turning them into fresh water.

Industrial Separation Procedure:

1. The seawater is inputted through pre-treatment. During the physical separation process of pre-treatment it involves mostly of filtration (physical separation) removing larger solids in seawater.

2. Next, when the water travels through a pipe, its ph rate has been adjusted, if the water is too acidic it can damage the membrane permanently, the cost for recovery is also very high.

3. The filtered seawater now enters a pump, which compresses and puts pressure onto the filtered seawater. The high-pressure pump releases the seawater, sends it towards the RO (Reverse Osmosis) Membrane. (Physical pressure) The procedure is vital to the product freshwater, if the pressure is low, the salt cannot be fully separated from the water by the membrane, so the quality of the water really depends on the pressure applied when entering membrane.

4. The RO Membrane is a semipermeable membrane that separates the salt particles from the water. The membrane also separates ions, large organics, bacteria and even small particles such as sodium, chlorine, calcium and magnesium. In reality usually around 1% of the salt does get through due to leaks or around seals. The water is not completely pure, but it is still drinkable in normal Australian standards. But if it is used for other industrial purposes, distillation of the water might be needed to guarantee security. The membrane removes as high as 99% of bacteria's and 90% of simple inorganic ions. (Physical separation, simple in applying pressure to seawater pushing the seawater through the membrane)

5. The water is then near pure freshwater, passed to post treatment also known as stabilization. Where the water's pH levels are been change usually from around 5 to neutral, which is 7

The separation method of desalination involves basic physical separation of applying pressure through membrane and filtration. There is other process of distillation, which involves high cost in energy usage (due to the fact that heat has to be constantly produced). It is not usually used for the desalination purpose in reality. There is no chemicals involve when separating the seawater apart from pH adjustments and when chemicals such as chlorine is used to clean the pipes, system etc. The properties of the mixture that allowed the physical separation include the pre-treatment filtration, where there is a difference...

Loading: Checking Spelling

0%

Read more

The Solution is the Sea Essay

1858 words - 7 pages In the last several years, California has been experiencing a very serious drought, of which is said to be the worst drought since record keeping has begun. This drought has sparked a lot of conflict between different groups in need of water and now politics are trying to organize where all the water should go. The water that California gets each year is split up into between three main areas: human needs, agriculture, and supporting the...

Sudan´s Fresh Water Supply Essay

1991 words - 8 pages 1.0 Introduction Water is one very essential resource for human existence. It accounts for about two thirds of the earth surface with a volume of about 1.4 billion cubic centimeter. About 97 percent of the total earth’s water is salt water from the ocean with only a minute percentage existing as freshwater accessible for direct human consumption. Freshwater is found in lakes, rivers, reservoirs and underground sources some of which are shallow...

Solutions to Sustain Freshwater

1889 words - 8 pages Would it be possible for humans to live without water? The answer is no because fifty percent of water is inside human bodies. In other words, water supports human lives, so every person is supposed to drink at least two litres of water everyday because it predominantly prevents them from being dehydrated. In terms of being the priceless resource, water is used in many fields such as agriculture, industry, business and so on. All preliminary...

water is essential to human life

618 words - 2 pages Everyone knows that water is essential to human life, but one third of the world's population lacks sufficient access to safe drinking water and sanitation to meet their basic needs. [www.gwp.org]Every year 3 million people die prematurely from water-related diseases in developing countries. [www.gwp.org] 884 million people in the world still do not get their drinking-water from improved sources, almost all of them in developing regions....

Water Needs In Singapore

2901 words - 12 pages Water Needs In Singapore Singapore's water resources are limited and we should not take the availability of water for granted. Our demand for water is increasing each year. With increasing affluence, Singaporeans enjoy a good standard of living and now own many modern appliances which demand ever greater use of water. Water consumption is also increased by the setting up of more nuclear families and households. Today,...

5 Ways to Bust California’s Drought

749 words - 3 pages The California water drought has been declared a crisis by the governor of California. 2013 was the driest year on record, and California could be running out of water. Californians should be water wise, and their use, or no use, of water will have an enormous impact on this drought. They can use the techniques published in a recent Time article called, 5 Ways to Bust California’s Drought, to reduce their water use. Landscape techniques,...

Nickel

888 words - 4 pages Nickel is one of the most important elements on the periodic table. It has plenty of history, as well as a huge importance to society. Its has unique chemical, physical, and geological properties. Nickel is used commercially in abundance, as it is used anywhere from simple art products such as ceramics to complex structures such as tubing for desalination plants. It is even used in the American five-cent coin, the "nickel".Nickel was...

Geography Research Project 2014

1579 words - 6 pages Ethical Issues All of the diagrams and information has been referenced in the bibliography. All graphs used have been cited and the original source of the diagrams has been stated in the bibliography. The name on the writer of the article or document has been stated as well as the date on which it was written. Figure 1 illustrates all of the constructed dams in the UAE. These are the main sources of the water in Dubai. As seen there are plenty...

Colour symbolism in F. Scott Fitzgerald's "Great Gatsby"

588 words - 2 pages A careful examination of the " The Great Gatsby", by F. Scott Fitzgerald reveals that his intention was to satirize the Corruption of society. Set in the core of America, Fitzgerald portrays a hedonistic society decaying in morals and consumed in materialism, he expresses this through the symbolism of colour and nature. Likewise, The critic, J.S...

Analysis of Water Sustainability in Australia

1596 words - 6 pages Everything, which exists in the world, requires water. Nevertheless, a lot of different places face crucial problems, which arise as the result of the water shortage. There are approximately seven billion of people on our planet Earth. In fact, each of them requires a liter of water per day to live and thrive; however, many of them are currently facing immense shortitudes. Actually, Australia faces serious challenge in getting sustainability as...

Low Energy Nuclear Reactor

2367 words - 9 pages Student's Last Name PAGE \* MERGEFORMAT 1 DISCLAIMERThese papers are to be used for research/reference purposes only. These papers are provided to help students write their own paper. All papers should be used with proper references.[Student's Full Name][Instructor's Name][Course Title and Number][Date]

One thought on “Desalination Essay

Leave a Reply

Your email address will not be published. Required fields are marked *